Ricoh G-P3 - Page 122

SC
[Level]
Symptom Possible Cause/Required Action
2. Turn off the DESS module function.
003
[D]
Log Data Error 3
• Invalid encryption key log due to defective NVRAM data
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting.
004
[D]
Log Data Error 4
• Unusual encryption function log due to the defective NVRAM data
1. Initialize the HDD with SP5832-004.
005
[D]
Log Data Error 5
• NVRAM or HDD, which is used in other machine, is installed.
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
099
[D]
Log Data Error 99
• Other than above causes
1. Ask your supervisor.
877
[B]
HDD Data Overwrite Security SD card error
The all delete cannot be
executed even though the
Data Overwrite Security Unit
(B735) is installed and
activated.
• Defective SD card (B735)
• Not installed SD card (B735)
1. Replace the NVRAM and then install the new SD
card (B735).
2. Check and reinstall the SD card (B735).
900
[D]
Electric counter error
Abnormal data is stored in the
counters.
• Defective NVRAM
• Defective controller
1. Turn the main switch off and on.
2. Check the connection between the NVRAM and
controller.
3. Replace the NVRAM.
Service Call Conditions
121
4