1004 042 DEV [CMY]: LS: TC *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 043 OPC [CMY]: LS: TC *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 044 Fusing: LS: Thick *EGB
Adjusts the paper exit and fusing motor speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 045 Trans. Belt: LS: TC *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 046 PFU: LS: Thick *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 047 Duplex: LS: Add: TC *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 048 Duplex: LS: Thick *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 049 Reverse: LS: CW: TC *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 050 Rever.: LS: CCW: TC *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 051 DEV / OPC [K] LS:TC2 *EGB
Adjusts the black development and OPC motor
speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 052 DEV [CMY]: LS: TC2 *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 053 OPC [CMY]: LS: TC2 *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 054 Fusing: LS: TC 2 *EGB
Adjusts the paper exit and fusing motor speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 055 T. Belt: LS: TC 2 *EGB Adjusts the transfer belt motor speed.
Service Mode Table
155
To Next Page
Loading...
