Ricoh G-P3 - Page 171

2104 002
[-1.00 to 1.00 / 0.00 / 0.01%/step]
[M]: M Magnifi. *EGB
2104 003 [C]: M Magnifi. *EGB
2104 004 [Y]: M Magnifi. *EGB
2105
[LD Power Cont.] LD Power Control
([Color], Process Speed) Process Speed -> LS: Low speed, RS: Regular speed
2105 001 [K] 0 *EGB
Adjusts the LD power.
[10 to 200 / 100 / 1%/step] DFU
2105 002 [M] 0 *EGB
2105 003 [C] 0 *EGB
2105 004 [Y] 0 *EGB
2105 009 [K] 0: LS *EGB
Adjusts the LD power at low speed.
[10 to 200 / 100 / 1%/step] DFU
2105 010 [M] 0: LS *EGB
2105 011 [C] 0: LS *EGB
2105 012 [Y] 0: LS *EGB
2106 Polygon Motor Stop Time
2106 001 *EGB
Adjusts the time to stop the polygon motor after
job end.
[0 to 180 / 10 / 1 sec/step]
2109 [LD BeamPattern] LD Beam Pattern
2109 001 Picture Addition
Adds the picture to the LD test pattern.
[0 or 1 / 0 /-]
0: Not execute, 1: Execute
2109 002 Pattern Select
Selects the LD test pattern.
[0 to 24 / 0 / 1/step]
2109 004 Color Select
Selects the color for the LD test pattern.
[0 to 4 / 0 / 1/step]
5. Service Tables
170
5