Ricoh G-P3 - Page 189

2403
[Normal: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 1 in B/W mode
(Process Speed, Paper Side) Process Speed -> LS: Low speed,
Paper Side: 1st or 2nd
2403 007 LS: 1st: T. Roll2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 15.3/12.5 (NA/EU) / 0.1 -µA /step]
2403 008 LS: 1st: Separa. *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2403 012 LS: 2nd: T. Roll2 *EGB [0 to 100 / 15.3/12.5 (NA/EU) / 0.1 -µA /step]
2403 013 LS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2407
[Normal: [FC]] Transfer roller current and discharge plate voltage for the image area of
plain paper 1 in color mode
(Process Speed, Paper Side) Process Speed -> RS: Regular speed,
Paper Side: 1st or 2nd
2407 013 RS: 1st: T. Roll2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 30.2/27.3 (NA/EU) / 0.1 -µA /
step]
2407 014 RS: 1st: Separa. *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2407 021 RS: 2nd: T. Roll2 *EGB
[0 to 100 / 25.5/30.2 (NA/EU) / 0.1 -µA /
step]
2407 022 RS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2408
[Normal: [FC]] Transfer roller current and discharge plate voltage for the image area of
plain paper 1 in color mode
(Process Speed, Paper Side) Process Speed -> LS: Low speed,
Paper Side: 1st or 2nd
2408 013 LS: 1st: T. Roll2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 21.3 / 0.1 -µA /step]
2408 014 LS: 1st: Separa. *EGB Adjusts the discharge plate voltage.
5. Service Tables
188
5