Ricoh G-P3 - Page 190

[0 to 4 / 2.0 / 0.1 -KV/step]
2408 021 LS: 2nd: T. Roll2 *EGB
[0 to 100 / 18.3/19.5 (NA/EU) / 0.1 -µA /
step]
2408 022 LS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2421
[Normal:[K]:LE] Transfer roller current and discharge plate voltage for the leading edge
area of plain paper 1 in B/W mode
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2421 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2421 007 T.Roll2: 1st *EGB
2421 012 T.Roll2: 2nd *EGB
2422
[Switch Timing] Switch timing from leading edge to normal, plain paper 1
(Paper Type, Edge) Paper Type -> N: Normal LE: Leading Edge
2422 002 T. Roll 2: N: LE *EGB [0 to 200 / 10 / 1 mm/step]
2422 003 Separation: N: LE *EGB [0 to 200 / 25 / 1 mm/step]
2423
[Normal: [K]: TE] Transfer roller current and discharge plate voltage for the trailing edge
area of plain paper 1 in B/W mode
Paper side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2423 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2423 007 T. Roll 2: 1st *EGB
2423 012 T. Roll 2: 2nd *EGB
2424
[Switch Timing] Switch timing from normal to trailing edge, plain paper 1
(Paper Type, Edge) Paper Type -> N: Normal, Edge ->TE: Trailing Edge
2424 002 T. Roll 2: N: TE *EGB [0 to 200 / 10 / 1 mm/step]
2424 003 Separation: N: TE *EGB [0 to 200 / 30 / 1 mm/step]
Service Mode Table
189
5