Ricoh G-P3 - Page 191

2426
[Normal: [FC]: LE] Transfer roller current and discharge plate voltage for the leading
edge area of plain paper 1 in color mode
Paper side: 1st or 2nd
2426 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2426 007 T. Roll 2: 1st *EGB
2426 012 T. Roll 2: 2nd *EGB
2428
[Normal: [FC]: TE] Transfer roller current and discharge plate voltage for the trailing edge
area of plain paper 1 in color mode
2428 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2428 007 T. Roll 2: 1st *EGB
2428 012 T. Roll 2: 2nd *EGB
2432
[Normal2: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 2 in B/W mode
(Process Speed, Paper Side, Unit) Process Speed -> RS: Regular speed,
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2432 007 RS: 1st: T. Roll 2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 15.5/15.3 (NA/EU) / 0.1 -µA /
step]
2432 008 RS: 1st: Separa. *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2432 012 RS: 2nd: T. Roll 2 *EGB [0 to 100 / 15.3 / 0.1 -µA /step]
2432 013 RS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2433
[Normal2: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 2 in B/W mode
(Process Speed, Paper Side) Process Speed -> LS: Low speed,
Paper Side: 1st or 2nd
2433 007 LS: 1st: T. Roll 2 *EGB Adjusts the transfer roller current.
5. Service Tables
190
5