Ricoh G-P3 - Page 193

2451
[Normal2:[K]:LE] Transfer roller current and discharge plate voltage for the leading edge
area of plain paper 2 in B/W mode
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2451 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2451 007 Trans.Roll2: 1st *EGB
2451 012 Trans.Roll2: 2nd *EGB
2452
[Switch Timing] Switch timing from leading edge to normal, plain paper 2
(Paper Type, Edge) Paper Type -> N: Normal, LE: Leading Edge
2452 002 T. Roll 2: N2: LE *EGB [0 to 200 / 10 / 1 mm/step]
2452 003 Separation: N2: LE *EGB [0 to 200 / 25 / 1 mm/step]
2453
[Normal2: [K]: TE] Transfer roller current and discharge plate voltage for the trailing edge
area of plain paper 2 in B/W mode
Paper side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2453 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2453 007 T. Roll 2: 1st *EGB
2453 012 T. Roll 2: 2nd *EGB
2454
[Switch Timing] Switch timing from normal to trailing edge, plain paper 2
(Paper Type, Edge) Paper Type -> N: Normal, TE: Trailing Edge
2454 002 T. Roll 2: N2: TE *EGB [0 to 200 / 10 / 1 mm/step]
2454 003 Separation: N2: TE *EGB [0 to 200 / 30 / 1 mm/step]
2456
[Normal2:[FC]:LE] Transfer roller current and discharge plate voltage for the leading
edge area of plain paper 2 in color mode
Paper Side: 1st or 2nd
2456 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
5. Service Tables
192
5