Ricoh G-P3 - Page 194

2456 007
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
T. Roll 2: 1st *EGB
2456 012 T. Roll 2: 2nd *EGB
2458
[Normal2:[FC]:TE] Transfer roller current and discharge plate voltage for the trailing edge
area of plain paper 2 in color mode
Paper Side: 1st or 2nd
2458 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2458 007 T. Roll 2: 1st *EGB
2458 012 T. Roll 2: 2nd *EGB
2462
[Spec1:[K]] Transfer roller current and discharge plate voltage for the leading edge area
of special paper 1 in B/W mode
Paper Side: 1st or 2nd
2462 007 RS: 1st: T.Roll2 *EGB [0 to 100 / 15.5 / 0.1 – A /step]
2462 008 RS: 1st:Separa. *EGB [0 to 4 / 2 / 0.1 -kV/step]
2462 012 RS: 2nd: T.Roll2 *EGB [0 to 100 / 25.0 / 0.1 -µA /step]
2462 013 RS: 2nd: Separa. *EGB [0 to 4 / 2 / 0.1 -kV/step]
2463
[Spec1:[K]] Transfer roller current and discharge plate voltage for the trailing edge area
of special paper 1 in B/W mode
Paper Side: 1st or 2nd
2463 007 LS: 1st: T.Roll2 *EGB [0 to 100 / 12.5 / 0.1 -µA /step]
2463 008 LS: 1st:Separa. *EGB [0 to 4 / 2 / 0.1 -kV/step]
2463 012 LS: 2nd: T.Roll2 *EGB [0 to 100 / 20.0 / 0.1 -µA /step]
2463 013 LS: 2nd: Separa. *EGB [0 to 4 / 2 / 0.1 -kV/step]
2467
[Spec1:[FC]] Transfer roller current and discharge plate voltage for the leading edge
area of special paper 1 in color mode
Paper Side: 1st or 2nd
2467 013 RS: 1st: T.Roll2 *EGB [0 to 100 / 18.5 / 0.1 -µA /step]
Service Mode Table
193
5