Ricoh G-P3 - Page 204

The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2622
[Switch Timing] Switch timing from leading edge to normal, OHP
(Paper Type, Edge) Paper Type -> OHP, LE: Leading Edge
2622 002 T. Roll 2: OHP: LE *EGB [0 to 200 / 10 / 1 mm/step]
2622 003 Separa.: OHP: LE *EGB [0 to 200 / 25 / 1 mm/step]
2623
[OHP: [K]: TE] Transfer roller current and discharge plate voltage correction for the trailing
edge area of OHP in B/W mode
2623 002 Transfer Roller2 *EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2623 003 Separation *EGB
2624
[Switch Timing] Switch timing from normal to trailing edge, OHP
(Paper Type, Edge) Paper Type -> OHP, TE: Trailing Edge
2624 002 T. Roll 2: OHP: TE *EGB [0 to 200 / 10 / 1 mm/step]
2624 003 Separa.: OHP: TE *EGB [0 to 200 / 30 / 1 mm/step]
2626
[OHP: [FC]: LE] Transfer roller current and discharge plate voltage correction for the
leading edge area of OHP in color mode
2626 002 Transfer Roller2 *EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2626 003 Separation *EGB
2628
[OHP: [FC]: TE] Transfer roller current and discharge plate voltage correction for the
trailing edge area of OHP in B/W mode
2628 002 Transfer Roller2 *EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
actually means 100%.
2628 003 Separation *EGB
Service Mode Table
203
5