Ricoh G-P3 - Page 205

2631
[Thin: [K]] Transfer roller current and discharge plate voltage for the image area of thin
paper in B/W mode
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2631 007 Transfer Roller 2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 18.3 / 0.1 -µA /step]
2631 008 Separation *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2633
[Thin: [K]] Transfer roller current and discharge plate voltage for the image area of thin
paper in B/W mode
Process Speed -> LS: Low Speed
2633 007 T.Roll 2: LS *EGB
Adjusts the transfer roller current.
[0 to 60 / 12.3/ 0.1 -µA /step]
2633 008 Separation: LS *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2636
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image area of thin
paper in color mode
2636 013 Transfer Roller 2 *EGB
Adjusts the transfer roller current.
[0 to 100 / 30.2/24.3 (NA/EU) / 0.1 -µA /
step]
2636 014 Separation *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2638
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image area, of thin
paper in color mode
Process Speed -> LS: Low Speed
2638 013 T.Roll 2: LS *EGB
Adjusts the transfer roller current.
[0 to 100 / 21.3/18.3 (NA/EU) / 0.1 -µA /
step]
2638 014 Separation: LS *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
5. Service Tables
204
5