5860 019 Mail Keep Setting *CTL
Sets the way of keeping the e-mail in the server.
[0 to 2 / 0 / 1/step]
0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
5860 020 ParMail Rec TOut *CTL
Adjusts the time for keeping the partial e-mails. If
the partial e-mails are not received during the set
time, these are deleted.
[1 to 168 / 72 / 1 h/step]
5860 021 MDN Res RFC2298 *CTL
Determines whether RFC2298compliance is
switched on for MDN reply mail.
[0 or 1 / 1 / -]
0: No, 1: Yes
5860 022 SMTP Aut FileldRep *CTL
Determines whether the FROM item of the mail
header is switched to the validated account after
the SMTP server is validated.
[0 or 1 / 0 / 1/step]
0: No. “From” item not switched,
1: Yes. “From” item switched.
5860 025 SMTP Auth DirectSet *CTL
Selects directly the way of SMTP authentication if
all SMTP authentications fail due to the error in the
SP5860-006.
This SP is activated only when SP5860-003 is set
to “Enable”.
Bit switch 0: LOGIN
Bit switch 1: PLAIN
Bit switch 2: CRAM MD5
Bit switch 3: DIGEST MD
Bit switch 4 - 7: Not used
5860 026
S/MIVE: MIME Header
Setting
*CTL
Selects the MIME header type of an E-mail sent by
S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
5. Service Tables
276
To Next Page
Loading...
