2: RFC standard
5866 [E-Mail Report]
5866 001 Report Validity *CTL
Disables and re-enables the email notification
feature.
[0 or 1/ 0 / 1/step]
0: Enable, 1: Disable
5866 005 Add DataFiled *CTL
Enables or disables to add the date field on the alert
notice e-mail.
[0 or 1 / 0 / 1/step]
0: Off, 1: On
5869 [RAM Disk Setting]
5869 001 Mail Function *CTL#
Enables or disables the e-mail transfer function. This
SP sets the RAM disk size for the e-mail transfer
function.
[0 or 1 / 0 / 1/step]
0: On, 1: Off
5870 [Common Key Info Writi] Common Key Information Writing
5870 001 Writing *CTL
Writes the authentication data (used for NRS) in the
memory.
5870 003 Initialize *CTL Initializes the authentication data in the memory.
5873 [SD Card Appli Move]
5873 001 Move Exec See ‘SD Card Appli Move’.
5873 002 Undo Exec See ‘SD Card Appli Move’.
5878 [Option Setup]
5878 001 Data Overwrite Security
Executes the setup for the Data Overwrite Security
Unit.
5878 002 HDD Encryption Executes the setup for the HDD Encryption Unit.
Service Mode Table
277
To Next Page
Loading...
