3. Turn on the power switch.
• Do not turn off the power switch until initialization is completed (‘Ready’ appears on the display
when initialization is completed). Otherwise, the machine may malfunction.
Selecting the Panel Display Language
• You can select one of these languages (the default is English): English, German, French, Italian, Dutch,
Swedish, Norwegian, Danish, Spanish, Finnish, Portuguese, Czech, Polish or Hungarian.
• You do not have to do this procedure if you use English. Do this procedure if you want to use a different
language.
1. Turn on the power switch of the printer.
• “Ready” shows on the panel display after the machine warms up.
2. Press the "Menu" key.
• “Menu” shows on the panel display.
3. Press the "" or "" key to select “Language.”
4. Press the "OK" key.
5. Press the "" or "" key to select the language you want.
6. Press the "OK" key.
Printer Installation
27
To Next Page
Loading...
