Displays the PM counter for each unit.
7803 001 Paper *EGB
Displays the number of sheets printed for each
current maintenance unit. When a unit is replaced,
the machine automatically detects that the new unit
is installed. Then, the current PM counter value is
automatically moved to the PM Counter - Previous
(SP7-906-1 to 10) and is reset to “0”.
The total number of sheets printed with the last unit
replaced can be checked with SP7-906-1 to 10.
SP7-803-001: This shows the number of pages
printed.
[0 to 9999999 / 0 / 1 sheet/step]
7803 002 S: PCU: [K] *EGB
7803 003 S: PCU: [M] *EGB
7803 004 S: PCU: [C] *EGB
7803 005 S: PCU: [Y] *EGB
7803 009 S: Transfer Belt Unit *EGB
7803 010 S: T. Roll 2 *EGB
7803 011 S: Fusing Unit *EGB
7803 012 S: By-pass *EGB
7803 013 S: Tray 1 *EGB
7803 014 S: Tray 2 *EGB
7803 015 S: Tray 3 *EGB
7803 016 S: Tray 4 *EGB
7803 017 R: PCU: [K] *EGB Displays the number of revolutions of motors or
clutches for each current maintenance unit.
[0 to 9999999 / 0 / 1 revolution/step]
When a unit is replaced, the machine automatically
detects that the new unit is installed. Then, the
current PM counter value is automatically moved to
the PM Counter - Previous (SP7-906-11 to 20) and
is reset to “0”. The total number of revolutions made
with the last unit replaced can be checked with
SP7-906-11 to 20.
[0 to 9999999 / 0 / 1 rotation/step]
7803 018 R: PCU: [M] *EGB
7803 019 R: PCU: [C] *EGB
7803 020 R: PCU: [Y] *EGB
7803 025 R: Trans Belt Unit *EGB
7803 026 R: T. Roll 2 *EGB
7803 027 R: Fusing Unit *EGB
7803 033 Toner Supply: [K] *EGB
Displays the number of sheets printed until the waste
toner bottle becomes full or toner runs out.
[0 to 9999999 / 0 / 1 /step]
7803 034 Toner Supply: [M] *EGB
7803 035 Toner Supply: [C] *EGB
7803 036 Toner Supply: [Y] *EGB
Service Mode Table
283
To Next Page
Loading...
