7803 037 R%: PCU: [K] *EGB Displays the value given by the following formula:
(Current revolution / Target revolution) × 100,
where “Current revolution” is the current value for
the counter of the part, and “Target revolution” is
the values of SP7-803-17 through 27. This shows
how much of the unit’s expected lifetime has been
used up.
The R% counter is based on rotations, not prints. If
the number of rotations reaches the limit, the
machine enters the end condition for that unit. If the
print count lifetime is reached first, the machine also
enters the end condition, even though the R%
counter is still less than 100%.
[0 to 999 / 0 / 1 rotation%/step]
7803 038 R%: PCU: [M] *EGB
7803 039 R%: PCU: [C] *EGB
7803 040 R%: PCU: [Y] *EGB
7803 045 R%: Trans Belt Unit *EGB
7803 046 R%: T. Roll 2 *EGB
7803 047 R%: Fusing Unit *EGB
7803 050 PCU Life: [K] *EGB
Displays the PCU unit life.
[-999 to 999 / 100 / 1/step]
7803 051 PCU Life: [Col] *EGB
7803 052 reserved *EGB
7803 053 reserved *EGB
7803 054 TransBeltU.Life *EGB
Displays the transfer belt unit life.
[-999 to 999 / 100 / 1/step]
7803 055 T.Roll2 Life *EGB
Displays the paper transfer unit life.
[-999 to 999 / 100 / 1/step]
7803 056 FusingUnit Life *EGB
Displays the fusing unit life.
[-999 to 999 / 100 / 1/step]
7804
[PM Counter Reset] Preventive Maintenance Counter Reset
(Sheets, Unit, [Color]) Trans Belt Unit: Transfer Belt Unit, T. Roll 2: Transfer Roller 2, Waste
Toner: Waste Toner Bottle, Toner: Toner Bottles
Clears the PM counter for each unit.
7804 001 Paper
7804 002 PCU: [K] - Clears the PM counter.
Press the Enter key after the machine asks
“Execute?”.
7804 003 PCU: [M] -
5. Service Tables
284
To Next Page
Loading...
