Selecting One Frame
5
Press + or – to select 1 Frame.
Press Fn1 or Fn2 to select the
frame.
6
Press C/D.
Specifying Multiple Frames Separately
5
Press + or – to select Sel Mult, and then press
C/D.
If thumbnail view was
displayed in step 2 on page
97, skip step 5.
6
Press + or – to select
Sel. Indiv., and then press
C/D.
7
Select the frame, and then press C/D.
Press the ADJ. lever to switch to the display for
specifying a range of frames. See step 7 and beyond
on page 99.
8
Repeat step 7 to select all the frames.
To deselect a frame, highlight the frame and press
C/D.
9
Press the N button.
10
Select Yes, and then press C/D.
To Next Page
Loading...
