Ricoh GXR - Page 111

Playback Functions
99
Specifying a Range of Multiple Frames
5
Press + or – to select Sel Mult, and then press
C/D.
If thumbnail view was
displayed in step 2 on page
97, skip step 5.
6
Press + or – to select
Sel. Range, and then press
C/D.
7
Select the starting point for the range of frames
you want to specify, and press C/D.
If you make a mistake when selecting the starting
point for the range of frames, press the DISP. button
to return to the screen for selecting the starting
point.
Press the ADJ. lever to switch to the display for
specifying frames separately. See step 7 and beyond
on page 98.
8
Select the ending point for
the range of frames you
want to specify, and press
C/D.
Export Still Images
Start Execute
9
Repeat steps 7 and 8 to specify all ranges.
10
Press the N button.
11
Select Yes, and then press C/D.