113
Playback menu
Changing the Protect Status of Multiple Files
Follow the steps below to change the protect status of
multiple selected les.
1
Select Protect in the playback menu, and press
Fn2.
In multi-frame playback,
proceed to step 2. In single-
frame playback, the options
shown at right will be
displayed. Highlight Sel Mult
and press C/D.
2
Select Sel. Indiv. or Sel. Range.
Select Protect in the
playback menu, and press Fn2
to display the options shown
at right. To select images
one at a time, highlight Sel.
Indiv., press C/D, and
proceed to step 3. To select images by specifying
ranges highlight Sel. Range, press C/D, and
proceed to step 3.1.
3
Select a photograph.
Use the directional pad
(page 37) to highlight a
photograph, and press
C/D. Protected
pictures are marked with a
icon. To remove protection
from a photograph, highlight it and press C/
D again.
To Next Page
Loading...
