165
coPying Pictures to a comPuter
Installing VM-1
1
Insert the supplied CD.
Turn on the Macintosh computer and insert the
supplied CD in a CD-ROM drive.
2
Select the disk for installation.
Double-click the RICOH icon > VM-1 folder > VM-1
Installer.pkg icon. The Install VM-1 window will be
displayed; click Continue. When the window for
selecting the installation location appears, select
the disk for installation, and then click Continue.
3
Install VM-1.
Click Install and enter your name and password,
and then click OK. A message that the installation is
complete will be displayed; click Close.
To change the installation location, click Change
Install Location....
To upgrade VM-1, click Upgrade.
To Next Page
Loading...
