83
more on PhotograPhy
Interval Shooting
To take photographs automatically at intervals of from
ve seconds to one hour, select Interval Shooting in the
shooting menu and follow the steps below:
1
Choose an interval.
Press Fn1 and Fn2 to highlight
hours, minutes, or seconds
and press + and – to change.
Press C/D to return to
shooting mode.
Interval is displayed in the
picture display.
2
Start shooting.
Press the shutter-release button. Photographs will
be taken automatically at the selected interval.
3
End shooting.
Press C/D to end shooting.
Cautions
• The interval timer is not available in
4 mode.
• The interval resets to zero when the camera is turned o.
• If the time needed to record photographs is longer than the
selected interval, the next photograph will not be taken until
recording is complete.
• The external ash unit will not re in interval shooting mode.
Use the built-in ash instead.
To Next Page
Loading...
