2. Press [Register] on the address book screen.
3. Enter the information of the destination in the input boxes displayed on the [Name]
tab, and select the title to classify the destination.
4. Press the [Destinations] tab, and then press [Folder].
5. Select [SMB (Send to Shared Folder on PC)] in [Protocol].
6. Under [Folder Authentication Info], select [Specify Other Authentication
Information] and then enter the name and password of the login user who will
access the shared folder.
7. Specify the network path to the shared folder in "Path".
Entering the path name manually
If the host name is "YamadaPC" ([1] on the check sheet) and the shared folder
name is "shared_doc" ([4]), enter as follows:
\\YamadaPC\shared_doc
When you cannot connect to the computer using the host name, enter the IP
address ([1] on the check sheet) and the shared folder name ([4] on the check
sheet) as follows:
\\192.168.0.152\shared_doc
To Next Page
Loading...
