Selecting a folder from the list
Enter the IP address or host name of the computer on which to search for a
shared folder, press [Browse Network], and then select the destination folder.
Depending on the connection destination, you may need to enter the login user
name and password.
8. Press [Connection Test] [Exit].
• When no connection is established, check the message that appears.
page256”When a Message Appears While Using the Scanner Function”
• Press [Cancel] to abort the connection test, such as when you make a mistake
specifying Path.
9. Press [OK] twice.
10. If necessary, press the [User Management / Other] tab and specify the settings.
11. Press [OK].
12. Press [Home] ( ) after specifying the settings.
13. When a message prompting you to back up the address book appears on the screen,
press [Go to Backup] to back up the address book.
If you select [Close], you can close the address book without backing up and go back
to the Home screen.
See "Making a Backup or Restoring the Address Book", User Guide (HTML).
• The connection test may take time.
• Even if the connection test was successful, the machine may fail to transfer the file if
you do not have write privileges for the shared folder or there is not enough space in
the internal storage.
• When the specified destination is updated using the Central Management function,
the spooled documents are sent to the destination after updating.
To Next Page
Loading...
