Setting Up the Scanner
32
2
-
--
-Before turning off the power
Before you turn off the power of this
machine, make sure that a standby
screen is displayed on the display
panel.
If you turn off the power while the
Scanner Features menu is displayed,
all the settings that you have config-
ured could be discarded, and this ma-
chine could return to its factory
default status.
You should also confirm that B is not
displayed on the screen, or the B in-
dicator on the front of this machine is
not lit, when you turn off the power.
Otherwise, loss of scan data or failure
in sending files might occur.
To Next Page
Loading...
