Display Summary
SM 4-11 J012/J013/J014
Trouble-
shooting
Menu/Menu Item Function
Maintenance ?
This menu contains all the functions used to test and clean the print head nozzles, align
the print heads, and other important maintenance procedures.
1 Nozzle Check? Prints the cross-hatch test pattern so you can visually
confirm whether inks are ejecting correctly from the print
heads.
2 Head-cleaning? Cleans the print heads. Clean the print heads when certain
colors are missing or printing faintly. Head cleaning
consumes ink.
3 Head-flushing? Cleans the print heads more thoroughly than
"Head-cleaning.” Flushing consumes more ink. Use this
function only after "Head-cleaning" fails to solve the
problem.
4 Head Position? Adjusts the alignment of the print head if the Nozzle Check
test pattern shows broken vertical lines, or if printed images
are blurred.
5 Adj. Paper Feed? Adjusts the paper feed setting if the Nozzle Check test
pattern shows horizontal misalignment, or if printed images
appear uneven.
6 Registration? Adjusts the print starting point for each paper tray. The
starting point is defined in the upper left corner.
To Next Page
Loading...
