Quick Reference
J012/J013/J014 4-64 SM
Print Head: Cleaning
(Flushing)
This is the second procedure you should do if normal print
head cleaning does not solve the problem. Print head
flushing consumes more ink than print head cleaning.
1. Pull the release under the operation panel forward and
raise the scanner unit.
2. Confirm that the envelope selector is forward.
3. [Menu]> "System Settings?"
4. [#] or [%] > "Maintenance" > [Yes]> "1 Nozzle
Check?"
5. [#] or [%] > "2 Head-flushing>" > [Yes]> "All Heads"
6. ['] or [(] > Select the print heads to be flushed: "All"
(all print heads), "Print-head 1" (Yellow/Magenta),
"Print-head 2" (Black/Cyan") > [Yes]
7. For more see "Print Head Flushing" in "4.
Troubleshooting.”
Print Head: Cleaning
(Normal)
This is the first procedure you should do to clean the print
heads if the Nozzle Check appears patchy or broken.
Clean the print heads at least 3 times before you do print
head flushing.
1. Pull the release under the operation panel forward and
raise the scanner unit.
2. Confirm that the envelope selector is forward.
3. [Menu]> "System Settings?"
4. [#] or [%] > "Maintenance" > [Yes]> "1 Nozzle
Check?"
5. [#] or [%] > "2 Head-cleaning>" > [Yes]> "All Heads"
6. ['] or [(] > Select the print heads to be cleaned: "All"
(all print heads), "Print-head 1" (Black/Cyan),
"Print-head 2" (Magenta/Yellow") > [Yes]
7. For more see "Print Head Cleaning" in "4.
Troubleshooting.”
To Next Page
Loading...
