Service Mode
SM 5-19 J012/J013/J014
Service
Tables
6. FUNCTION
Use these items to test the machine operation.
ADF. FEED TEST Tests original feed
Use this function to test the operation of original feed through the ARDF. Originals fed
through the ARDF for this test are not counted.
To do the test:
1. Set the originals in the ARDF.
2. Press [Start] to start the test.
3. Choose either "1-sided" or "2-sided" for either simplex or duplex testing.
4. Press [Clear/Stop] to stop the test at any time.
CCD MOVE TO HOME Moves the CCD to its home position
Use this function to move the slider to the home position on the left. This prepares the
machine for shipping from the factory or moving the machine to another location. This
operation does not affect the scan counter.
FAX RES. COPY Tests the fax resolution
Use this function to test fax resolution. This allows testing without actually sending a fax to a
remote machine; the data is redirected to the machine's own coding unit and printed out.
Note:
This function is available for the fax models only.
The tray selection for this test is always set for Tray 1 (this cannot be changed).
SCAN TEST Tests the function of the CCD
This test conducts repeat CCD scanning. To stop the test, press [Clear/Stop].
To Next Page
Loading...
