Ricoh M052 - Finisher Main Board; When Reinstalling a New Finisher Main Board

Internal Finisher
SM 4-125 M052/M053/M054
Replacement
and
Adjustment
4.14.20 FINISHER MAIN BOARD
1. Left cover ( p.4-11)
2. Finisher left cover [A] (
x 1)
3. Finisher main board [A] (
x 2, x all)
When reinstalling a new finisher main board
Check the DIP switches (SW100: [A], SW101: [B]) on the old main board. If the settings on the
new finisher main board are different from the old finisher main board, change the settings on
the new board (they must be the same as the settings on the old board).