Ricoh M052 - Overview; Mechanical Component Layout

Overview
M052/M053/M054 1-2 SM
1.2 OVERVIEW
1.2.1 MECHANICAL COMPONENT LAYOUT
1. Scanner unit
2. Laser unit
3. Charge roller
4. Cartridge (AIO-type)
5. Drum
6. Development roller
7. By-pass feed tray
8. By-pass feed roller
9. Paper feed roller
10. Friction pad
11. Paper tray
12. Registration roller
13. Transfer roller
14. Pressure roller
15. Hot roller
16. Junction gate 1*
1
17. Paper exit roller*
2
18. Junction gate 2*
3
19. Inverter roller
 *
1
: Junction gate 1 is not movable for the finisher model (M054).
 *
2
: Paper exit roller is not used for the finisher model (M054).
 *
3
: Junction gate 2 is not movable for the standard model (M052).