Ricoh M052 - Paper Size Sensors

Electrical Components
M375/M376/M386/M389 8 SM
1.3.5 PAPER SIZE SENSORS
1. Remove the target paper feed unit.
2. Pull out the target paper tray.
3. Sensor box [A] under the bottom of the paper feed unit ( x 2)
4. Paper size sensor 1 [A], 2 [B], 3 [C] ( x 1, hooks each)
 Use the white connector when reassembling the paper size sensor 1.
 Use the blue connector when reassembling the paper size sensor 2.
 Use the yellow connector when reassembling the paper size sensor 3.