Specifications
SM Appendix 1-9 M052/M053/M054
Appendix:
Specifications
IFAX Specifications
Connectivity:
Local area network
Ethernet 100base-Tx/10base-T
IEEE802.11a/g (wireless LAN), 1000 Base-T
Resolution:
Main scan: 400 dpi, 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
To use 400 dpi, IFAX SW01 Bit 4 must be set to “1”.
Transmission Time:
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size: Maximum message width is A4/LT.
E-mail File Format:
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
Protocol:
Transmission: SMTP, TCP/IP
Reception: POP3, SMTP, IMAP4, TCP/IP
Data Rate:
100 Mbps(100base-Tx)
10 Mbps (10base-T)
Authentication
Method:
SMTP-AUTH
POP before SMTP
A-POP
Remark: The machine must be set up as an e-mail client before installation. Any
client PCs connected to the machine through a LAN must also be
e-mail clients, or some features will not work (e.g. Autorouting).
To Next Page
Loading...
