Ricoh M052 - Ieee 802.11 A;G, G (D377: Wireless Lan); Installation Procedure

Controller Options
SM 2-31 M052/M053/M054
Installation
SP No. Title Setting
SP5-836-001 Capture Function (0:Off 1:On) "1"
SP5-836-002 Panel Setting "0"
5. Check the operation.
6. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the
end of this section).
2.8.4 IEEE 802.11 A/G, G (D377: WIRELESS LAN)
Installation Procedure
 Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces or printer enhanced option at one
time: (IEEE 802.11 a/g, g (Wireless LAN), Gigabit Ethernet, or File Format Converter).
1. Remove the I/F-slot cover [A] from the I/F-slot (
x 2).
2. Install the wireless LAN board [A] (Knob-screw x 2) into the I/F-slot.
3. Make sure that the machine can recognize the option (see ‘Check All Connections’ at the