System SP6-xxx
M052/M053/M054 5-102 SM
5.7 SYSTEM SP6-XXX
5.7.1 SP6-XXX (PERIPHERALS)
6006 [ADF Adjustment]
Adjusts the side-to-side and leading registration of originals with the ARDF.
001 S to S Registration: 1st
*ENG
[-3.0 to 3.0 / 0 / 0.1 mm/step ]
002 S to S Registration: 2nd
003 Leading Edge Registration *ENG
[-5.0 to 5.0 / 0 / 0.1 mm/step ]
Adjusts the amount of paper buckle to correct original skew for the front and
rear sides.
006 Buckle: Duplex: 2nd *ENG
[-2.5 to 2.5 / 0 / 0.1 mm/step ]
Adjusts the erase margin at the original trailing edge.
007 Trailing Edge Erase *ENG
[-10 to 10 / 0 / 0.1 mm/step ]
6007
[ADF INPUT Check]
Displays the signals received from the sensors and switches of the ARDF. Only
Bit 0 is used for ADF input check (see "Input Check" in this section).
6008
[ADF OUTPUT Check]
Activates the electrical components for functional check.
It is not possible to activate more than one component at the same time (see
"Output Check" in this section).
To Next Page
Loading...
