Ricoh M052 - Input and Output Check; Input Check Table

Input and Output Check
M052/M053/M054 5-164 SM
5.10 INPUT AND OUTPUT CHECK
5.10.1 INPUT CHECK TABLE
When entering the Input Check mode, 8 digits display the result for a section. Each digit
corresponds to a different device as shown in the table.
Bit No. 7 6 5 4 3 2 1 0
Result
0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
Mianframe
5803 Description
Reading
0 1
5803 1
Cover Open (Front door or
duplex unit)
Open Closed
5803 2 Main Motor:Lock Not lock Lock
5803 3 Polygon Motor:Lock Not lock Lock
5803 4 Duplex Fan :Lock Not lock Lock
5803 5 Main Fan :Lock Not lock Lock
5803 6 PSU Fan :Lock Not lock Lock
5803 7 Controller Fan :Lock Not lock Lock
5803 8 Tray Set (Tray 1) Not set Set
5803 9 Fusing Temp: Error No error Error
5803 10 Toner End Sensor Not end End
5803 11 Paper Overflow Sensor
5803 12 Regist Sensor Paper not detected Paper detected