System SP5-xxx
M052/M053/M054 5-42 SM
5401
[Access Control] DFU
When installing the SDK application, SAS (VAS) adjusts the following
settings.
103
Default Document ACL *CTL -
Whenever a new login user is added to the address book in external
certification mode (for Windows, LDAP, RDH), the default document ACL is
updated according to this SP setting.
[0 to 3 / 0 / 1]
0: View
1: Edit
2: Edit/Delete
3: Full control
Note: This SP setting is ignored on a machine that is not using document
server.
104
Authentication Time *CTL [0 to 255 / 0 / 1 second]
Specifies the time for the authentication timeout.
0 = 60 seconds, 1 to 255 = displayed time (seconds)
162
Extend Certification
Detail
*CTL
Selects the log out type for the extend
authentication device.
Bit 0: Log-out without an IC card
0: Not allowed (default)
1: Allowed
200 SDK1 Unique ID *CTL
"SDK" is the "Software Development Kit".
This data can be converted from SAS
(VAS) when installed or uninstalled.
201
SDK1 Certification
Method
*CTL
210 SDK2 Unique ID *CTL
211
SDK2 Certification
Method
*CTL
220 SDK3 Unique ID *CTL
221
SDK3 Certification
Method
*CTL
To Next Page
Loading...
