Ricoh M052 - Page 313

System SP5-xxx
SM 5-91 M052/M053/M054
System
Maintenance
Reference
5858
[Debug Save When] *CTL -
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
001 Engine SC Error
Turns on/off the debug save for SC codes
generated by printer engine errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
002 Controller SC Error
Turns on/off the debug save for SC codes
generated by GW controller errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
003 Any SC Error
[0 to 65535 / 0 / 1 /step]
004 Jam
Turns on/off the debug save for jam errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
5859 [Debug Save Key No.] *CTL
-
001 Key 1
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on
the controller board.
[–9999999 to 9999999 / 0 / – ]
002 Key 2
003 Key 3
004 Key 4
005 Key 5
006 Key 6
007 Key 7
008 Key 8
009 Key 9