Ricoh M052 - Page 347

System SP8-xxx
SM 5-125 M052/M053/M054
System
Maintenance
Reference
8 06x 3 Staple Number of jobs started in Staple mode.
8 06x 4 Booklet Not used
8 06x 5 Z-Fold Not used
8 06x 6 Punch
Number of jobs started in Punch mode. When Punch
is set for a print job, the P: counter increments. (See
SP8 064 6.)
8 06x 7 Other Reserved. Not used.
8 06x 8 Inside-Fold Not used
8 06x 9 Three-IN-Fold Not used
8 06x 10 Three-OUT-Fold Not used
8 06x 11 Four-Fold Not used
8 06x 12 KANNON-Fold Not used
8 06x 13 Perfect-Bind Not used
8 06x 14 Ring-Bind Not used
8 071
T:Jobs/PGS *CTL
[0 to 9999999/ 0 / 1]
These SPs count the number of jobs broken down by the number of pages
in the job, regardless of which application was used.
8 072
C:Jobs/PGS *CTL
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of copy jobs by size based on
the number of pages in the job.
8 073
F:Jobs/PGS *CTL
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of fax jobs by size based on
the number of pages in the job.
8 074
P:Jobs/PGS *CTL
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of print jobs by size based on
the number of pages in the job.