Ricoh M052 - Page 98

Adjusting Copy Image Area
M052/M053/M054 4-10 SM
SP6-006-002). The image area moves to the rear side of the copier when you specify a
larger value.
6. Measure the distance between the leading of the image area and the leading edge of the
paper [B].
7. Adjust the leading edge registration (Leading Regist: SP6-006-003). The image area
moves to the right side of the copier when you specify a larger value.
8. Measure the distance between the trailing edge of the image area and the trailing edge of
the paper [C].
9. Adjust the erased area on the trailing edge (Trailing Erase: SP6-006-007).
10. Compare the copy with the original.
11. Adjust the sub-scan magnification (SP6-017-001). The specification is ±1.0%.