Ricoh M199 - ID Chip Board; Lsu Fan Motor

Electrical Components
M199/M200/M203/M204 3-78 SM
3.13.11 LSU FAN MOTOR
1. Left cover (page 3-8 "Left Cover")
2. LSU fan motor [A] (2hooks,
× 1)
 Install the LSU fan motor with its decal facing the outside of the machine.
3.13.12 ID CHIP BOARD
1. Rear cover (page 3-6 "Rear Cover")
2. Left cover (page 3-8 "Left Cover")
3. Controller box cover (page 3-63 "Controller Board")
4. Only for MF Models: FCU and Speaker bracket (page 3-63 "Controller Board")
5. Disconnect the connector (CN305) on the EGB.
6. Interlock switch base (page 3-74 "Interlock Switches")
7. Fusing fan base (page 3-75 "Fusing Fan Motor")
8. Drive unit (page 3-32 "Black AIO Motor")
9. Take the harnesses aside around the LSU fan base [A].
10. LSU fan base [A] (
× 2, × 1)
11. ID Chip Board [B] (
× 3)