and Adjustment
If MUSIC has not been performed successfully
1. Open the upper cover and check the lot number of the laser optics housing unit.
2. Contact your supervisor, and get the LD parameters for this lot number [A].
3. Open the front cover and turn on the machine.
4. Program the settings for the laser optics housing unit.
On the LCD, access “LSU Adjustment” inside the “Engine Maintenance” menu.
Manually input the corresponding LSU data from your supervisor into the space provided
on the LCD.
5. Close the front cover.
6. Execute “Color Registration”, which is inside the “Engine Maintenance” menu.
7. Turn the main power Off and On.
MUSIC will be performed automatically.
8. If necessary, adjust the registration settings for each tray and for the front and rear
sides of the paper with the "Engine Maintenance" menu.
To Next Page
Loading...
