Ricoh M199 - Paper Exit Sensor

Paper Exit
M199/M200/M203/M204 3-62 SM
3.12.2 PAPER EXIT SENSOR
1. Rear cover (page 3-6 "Rear Cover")
2. Operation panel (page 3-69 "Operation Panel")
3. Right cover (page 3-8 "Right Cover")
4. Fusing stripper pawl solenoid assembly [A] (
× 4)
 The upper right screw in the above photo is different from other 3 screws.
5. Remove the paper exit sensor [C] while lightly pressing the feeler [B] in the direction
shown by the arrow (4 hooks,
× 1).