Ricoh M199 - EGB (MF Models)

Electrical Components
SM 3-67 M199/M200/M203/M204
Replacement
and Adjustment
3. Replace the EEPROM if the EEPROM on the old EGB is defective.
 Keep the EEPROM away from objects that can cause static electricity. Static
electricity can damage EEPROM data.
 Make sure that the EEPROM is correctly installed on the EGB.
EGB (MF Models)
1. Rear cover (page 3-6 "Rear Cover")
2. Controller box cover (page 3-63 "Controller Board")
3. FCU and Speaker bracket (page 3-63 "Controller Board")
4. EGB [A] (all
s, × 6 )
5. EEPROM [B]