Ricoh M199 - IMAGE FUSING

Image Fusing
SM 3-51 M199/M200/M203/M204
Replacement
and Adjustment
3.10 IMAGE FUSING
 Make sure that the fusing unit is cool before you touch it. The fusing unit can be very hot.
 Make sure to restore the insulators, shields, etc after you service the fusing unit.
3.10.1 FUSING UNIT
 Execute "Reset Fuser Unit" with the "Engine Maintenance" menu if you replace the fusing
unit, otherwise a fusing error may occur.
1. Open the front cover.
2. Left cover (page 3-8 "Left Cover")
3. Disconnect the connectors [A], [B].
4. Fusing unit [C] (
× 3)