Ricoh M199 - Scanner Unit (Only for Mf Models); Scanner Unit

Scanner Unit (only for MF Models)
SM 3-11 M199/M200/M203/M204
Replacement
and Adjustment
3.4 SCANNER UNIT (ONLY FOR MF MODELS)
3.4.1 SCANNER UNIT
1. Rear cover (page 3-6 "Rear Cover")
2. Controller box cover (page 3-63 "Controller Board")
3. Remove the left stand cover [A] and right stand cover [B]. (hook × 1 each)
4. Disconnect the two flat cables [C] with the ferrite core [D] (
×2, 2 hooks).
5. Disconnect the three harnesses and ground wire from the left stand. (
× 3, × 1)
6. Open the top cover and remove the stepped screw [E].