Ricoh M199 - Return to Stand-By Mode; Timer Settings (MF Models); Timer Settings (Printer Models)

Energy Saving
M199/M200/M203/M204 6-2 SM
Timer Settings (Printer Models)
 The user can set this timer with the menu mode.
1. Press [Menu].
2. Press [
] or [ ] to scroll through the menu listing and press [OK] to select.
3. [System]
[Energy Saver 2] [On/Off] > [On]
4. [System]
[Energy Saver 2] [E.Saver2 Timer] [1] to [240] min (Select the time with
[
] / [ ] keys.)
5. Press [Escape] to return to the previous menu.
 The default setting of Sleep mode is 1 minute.
Timer Settings (MF Models)
 The user can set this timer with the User Tools mode.
1. Press [User Tools].
2. Press [
] or [ ] to scroll through the menu listing and press [OK] to select.
3. [Admin. Tools]
[Energy Saver Mode] [EnergySaverMode 2] [On/Off] [On]
4. [Admin. Tools
[Energy Saver Mode] [EnergySaverMode 2] [1] to [240] min (Input
the time with the 10-key)
5. Press [Escape] to return to the previous menu.
 The default setting of Sleep mode is 1 minute.
Return to Stand-by Mode
Energy Saver Mode 2 (Sleep Mode)
Recovery time
 30 seconds or less
Energy Saver Mode 1
Recovery time
 10 seconds or less