Ricoh M199 - Transfer Roller

Paper Transfer
SM 3-47 M199/M200/M203/M204
Replacement
and Adjustment
3.9.2 TRANSFER ROLLER
 If you install a new roller, execute "Reset 2nd Transfer Unit" with the "Engine
Maintenance" menu, otherwise a paper transfer error may occur.
1. Transfer Unit (page 3-46 "Transfer Unit")
2. Release the two hooks [A] at both sides of the transfer unit.
3. Open the transfer roller unit [B] and remove it.
4. Transfer roller assembly [C] (
× 2)
5. Release the holder [D] at the left side of the transfer roller unit (hook).