Ricoh M199 - Reassembling the Registration Roller Unit; Registration Sensor

Paper Transfer
SM 3-49 M199/M200/M203/M204
Replacement
and Adjustment
Reassembling the registration roller unit
When installing the tension spring, make sure that the tension spring correctly hooks onto the
bushing of the registration idle roller as shown below [A].
3.9.4 REGISTRATION SENSOR
1. Rear cover (page 3-6 "Rear Cover")
2. Operation panel (page 3-69 "Operation Panel")
3. Right Cover (page 3-8 "Right Cover")
4. Registration sensor assembly [A] (
× 1, × 1)
5. Registration sensor [B] (hooks)