Ricoh M199 - Updating the Engine Firmware

Firmware Updating
M199/M200/M203/M204 4-28 SM
4.3.3 UPDATING THE ENGINE FIRMWARE
When updating firmware, always disconnect any other cable(s) than the one being used for the
update operation.
1. Download the firmware files to your computer.
 FwUpdateToolSP.exe (Service mode execute file)
 Setting.ini (Parameter setting)
 yyy.bin (Engine Firmware)
2. Make a folder on a local drive of your computer and save the files there.
3. Turn the machine on.
4. Connect the computer and the machine through a network or directly by USB.
5. Open the top cover.
6. Double-click the "FWUpdateToolSP.exe" file to execute the updating program.
A dialog box with cautionary statements appears.
7. Read the cautionary statements carefully, and then click "OK".
The firmware update tool opens.
8. For a USB connection, click "Eng. F/W Update (USB)" [A].
For a network connection, enter the machine's IP address in "Machine IP" [B], and then click
"Eng. F/W Update (NET)" [C].