Ricoh M199 - Page 144

Firmware Updating
SM 4-29 M199/M200/M203/M204
System
Maintenance
Reference
The firmware update starts.
 When the firmware update starts:
For Printer models: The alert LED starts to light up.
 For MF models: The alert LED starts to light up and machine makes a beep sound.
 Do not turn the main power off from this point until the update procedure is
completed.
9. Wait until the update completion message appears on the machine’s control panel.
 When the firmware update is completed:
For Printer models: The alert LED starts flashing.
 For MF models: The alert LED starts flashing and machine makes a beep sound.
10. Click “Close” [A] to close the update tool.