Ricoh M199 - Page 130

Service Menu
SM 4-15 M199/M200/M203/M204
System
Maintenance
Reference
P
N
P Name
NA Model: RICOH/ 'nul'
EU Model: RICOH/ NRG/ LANIER
ASIA Model: RICOH/ LANIER
China Model: RICOH
[0x00 to 0x7F / - / -]
Destination
Sets the destination and updates the engine setting.
DOM/ NA (Default)/ EU/ CHN/ TAIWAN/ ASIA / LA
2nd Transfer
Media Type
Sets the Media type.
*Plain paper, Thin Paper, Thick Paper 2, Thick
Paper 1, Envelope, Cardstock, Bond Paper, Label
Paper, Prepunched, Preprinted, Letterhead, Color
Paper, Recycled Paper, Middle Thick
2nd Front
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 A/step]
2nd Back
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 A/step]
Fuser Temp.
Adjusts the temperature of the fusing unit, based
on the default value.
[-30 to 0 / 0 (Default) / 2°C/step]
Registration
Horiz. Tray1
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Vert.Tray1
Adjusts the vertical registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Horiz Bypass
Tray
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]