Ricoh MP 2590 Troubleshooting Guide

When a Message Is Displayed
23
3
You do not have
privileges to
use this func-
tion.
Use of this function is restricted. Contact the administrator.
Authentication
failed.
Wrong login user name or password. Confirm correct login user name
or password.
Authentication
failed.
Authentication is not possible
from this machine.
Contact the administrator.
Connection with
LDAP server has
failed. Check
the server sta-
tus.
A network error has occurred and
connection has failed.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See “Administrator Tools”,
General Settings Guide.
LDAP server
auth. has
failed. Check
the settings.
The entered user name or pass-
word does not match that speci-
fied for LDAP server
authentication.
Make settings correctly for the
user name and the password for
LDAP server authentication.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at
n.)
The number of search results has
exceeded the maximum number
of items that can be displayed.
Search again after changing the
search conditions.
LDAP server
search timed
out. Check the
server status.
A network error has occurred and
connection has failed.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See “Administrator Tools”,
General Settings Guide.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder.
To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select] for the message displayed
on the Scan to Folder screen.
Sender's name is
not selected.
Specify send-
er's name.
The sender has not been specified. A sender's name should be speci-
fied before sending e-mail. Send
e-mail after specifying the send-
er's name.
Message Cause Solution

Ricoh MP 2590 Specifications

General

Brand	Ricoh
Model	MP 2590
Category	Printer
Language	English